®
COOPER LIGHTING - SURE-LITES
DIMENSIONS
DESCRIPTION
4 1/4" (108mm)
6 1/4" (159mm)
5 3/4" (146mm) (277V)(conversion kit)
The Sure-Lites Pinnacle Family
of Surface Mounted Die Cast
Aluminum Exits combine
strength, durability and
aesthetics. The pleasing lines
and the range of
8 1/4" (210mm) (277V)(conversion kit)
1 1/4" (32mm)
2 5/8" (67mm) (277V)
(conversion kit)
architecturally compatible
finishes will add a new
dimension to any design.
8 1/4"
(210mm)
Unlike competitive units that
have a pronounced dot effect
from protruding diodes, the
Pinnacle LED offers unequalled
uniform illumination and
brightness.
CAX SERIES
13 5/8" (346mm)
2 1/4"
(57mm)
AC Only
LED Lamping
EXIT LIGHTING
ORDERING INFORMATION- LED LAMP EXITS
SAMPLE NUMBER: CAX610065RB
CAX
• 120 VAC or 277 VAC Input
wattage
Family
Factory
Housing
Factory Options
CAX=Die Cast
Aluminum Exit
Surface Mount
Options
Finishes
2C= Two Circuit Operation
• Die cast aluminum
housing with hinged face
plate and die cast canopy
for ceiling or end
00=No Options
65=Tamperproof Screws
85=Vandal Shield
Blank=Brushed
Aluminum
Face with
Black
Housing
W=White
B=Black
Accessories (Order Separately)
Screwdrivers
059012SP=Tamperproof Screwdriver Bit
VRSD=Vandal Resistant Screwdriver
WG10=Surface, Mount Wire Guard
WGS11=Ceiling, End Mount Wire Guard
Series
6=AC Only,LED
mounting
• Screw-In LED Lamps: two
1W long life T6 1/2
intermediate base lamps
Letter Colors
R=Red
G=Green
BZ=Bronze
Face Options
1=Single
2=Double
VS1=polycarbonate vandal shield
Voltage
Blank=120/277V
47=120/347V
Pendant Kits
• Universal pattern
Battery
00=No Battery
CAX18PK=Pendant Kit, white
CAX18PKHT=”Hang-true” Pendant Kit,
white
knockouts on rear of single
face housing for direct
mounting to junction box
• NFPA 101 compliant
knockout chevrons allow
quick conversion to
directional signs
ORDERING INFORMATION-SCREW-IN LED EXITS
SAMPLE NUMBER: CAX1LEDACR
CAX
• Damp Location Listed
(except exits with “2C”
Option), UL 924 Listed, Life
Safety NFPA 101, CSA
certified, NEC/OSHA, UL
FTBR Listed (consult your
Cooper Lighting
Family
Emergency Operation
AC=AC Only
Accessories (Order Separately)
DC Socket Kit
PDC6=Two 6V, 3.6W DC lamps
PDC12=Two 12V, 3.6W DC lamps
Emergency Power Pack
CAX3PP=Black
CAX3PPW=White
CAX3PPBZ=Bronze
277V Conversion Kit
AD277CAX=Black
Factory
Options
65=Tamperproof
Screws
85=Vandal Shield
95=AC Only Fire
Alarm Interface
CAX=Die Cast
Aluminum Exit
Surface Mount
Letter Color
R=Red
Face Options
1=Single
2=Double
Housing Finishes
Blank=Brushed Aluminum
Face with Black Housing
W=White
Representative for
Lamp Type
LED=LED Lite Stix™
Screw-in LED Lamps
applicable fixture types),
most state and local codes
B=Black
AD277CAXW=White
BZ=Bronze
AD277CAXBZ=Bronze
Vandal Resistant Screwdrivers
059012SP=Tamperproof
Screwdriver Bit
Voltage
Blank=120V
77=277V
VRSD=Vandal Resistant Screwdriver
WG10=Surface, Mount Wire Guard
WGS11=Ceiling, End Mount Wire Guard
VS1=Polycarbonate Vandal Shield
Energy Data
Input Power:
Input Current(Max.):
Power Factor:
T.H.D.:
120V 277V 347V
120V 277V 347V
120V 277V
120V 277V
Standard Power - LED Exits
Red Letters Single Face
Red Letters Double Face
Green Letters Single Face
Green Letters Double Face
5.6W 5.7W 6.0W
7.3W 7.5W 8.3W
6.7W 6.8W 6.8W
9.5W 9.7W 9.9W
.07A .03A .02A
.07A .03A .03A
.07A .03A .02A
.09A .04A .03A
>.71 >.71
>.83 >.83
>.79 >.79
>.90 >.90
<36% <36%
<33% <34%
<30% <31%
<26% <27%
LED Lite-Stix™ Screw-In Lamps
Red Letters
2.0W 4.3W
.09A .03A
>.19 >.58
<19% <22%
634 COOPER LIGHTING
®
COOPER LIGHTING - SURE-LITES
DIMENSIONS
DESCRIPTION
4 1/4" (108mm)
6" (152mm)
8 1/4" (210mm) (277V)(conversion kit)
5 3/4" (146mm) (277V)
The Sure-Lites Pinnacle Family
of Surface Mounted Die cast
Aluminum Exits combine
(conversion kit)
1 1/4" (32mm)
2 5/8" (67mm) (277V)
strength, durability and
(conversion kit)
aesthetics. The pleasing lines
and the range of architecturally
compatible finishes will add a
new dimension to any design.
8 1/4"
(210mm)
2 1/4"
(57mm)
13 5/8" (346mm)
CAX SERIES
ORDERING INFORMATION-LED LAMP EXITS
NUMBER: CAX717020R
Die Cast
Self-Powered
SAMPCLE AX
LED Lamping
Family
CAX=Die Cast Aluminum
Exit Surface Mount
Accessories (Order Separately)
Screwdrivers
0590-12SP=Tamperproof
Screwdriver Bit
Factory Options
00=No Options
Housing Finishes
EXIT LIGHTING
Blank=Brushed Aluminum
Face with Black Housing
W=White
20=DC Flasher
30=DC Flasher/ Buzzer
65=Tamperproof Screws
85=Vandal Shield
90=DC Only Fire Alarm
Interface
Series
7=Self-Powered LED
VRSD=Vandal Resistant
Screwdriver
VS1=polycarbonate vandal shield
B=Black
BZ=Bronze
• Dual-voltage input
120/277VAC, 60Hz
Pendant Kits
Factory Options
SD=Self Diagnostics
CAX18PK=Pendant Kit, white
CAX18PKHT=”Hang-true”
Pendant Kit, white
WG10=Surface
WGS11=Ceiling, end
Face Options
1=Single
2=Double
• Die cast Aluminum
housing with hinged
faceplate and die cast
canopy for ceiling or end
mounting
Letter Colors
R=Red
G=Green
Battery
70=Nickel Cadmium
• Screw-in LED lamps: two
1W long life T 6 1/2
intermediate base lamps
ORDERING INFORMATION-SCREW-IN LED LAMPS
SAMPLE NUMBER: CAX1LEDSPR
• Lead Calcium or Premium
Nickel Cadmium battery
Factory Options
SD= Self-Diagnostics
Family
CAX=Die Cast Aluminum
Exit Surface Mount
Factory Options
Blank=None
20=DC Flasher
Emergency Operation
SP=Self-Powered
• Universal pattern
30=DC Flasher/ Buzzer
65=Tamperproof Screws
85=Vandal Shield
90=DC Fire Alarm Interface
Letter Color
R=Red
Face Options
1=Single
2=Double
knockouts on rear of single
face housing for direct
mounting to junction box
Accessories (Order Separately)
059012SP=Tamperproof
Screwdriver Bit
VRSD=Vandal Resistant
Screwdriver
VS1=polycarbonate vandal shield
Pendant Kits
Housing Finishes
Blank=Brushed Aluminum
Face with Black Housing
W=White
B=Black
BZ=Bronze
Battery
Blank=Lead Calcium
70=Nickel Cadmium
• NFPA 101 compliant
knockout chevrons allow
quick conversion to
directional signs
Lamp Type
LED=LED Lite Stix™
Screw-in LED Lamps
CAX18PK=Pendant Kit, white
CAX18PKHT=”Hang-true”
Pendant Kit, white
WG10=Surface
WGS11=Ceiling, end
Voltage
Blank=120V/277V
47=120/347V
• Line-latching, Solid-State
voltage limited charger,
Solid-State switching, low-
voltage disconnect,
brownout circuit,
Wattage Ratings
Lead Calcium Battery=10.8W for 1 1/2 hrs., 7.2W for 2 hrs.
Nickel Cadmium Battery=15.0W for 1 1/2 hrs.
overload/short-circuit
protection, test
Energy Data
switch/power indicator
light
Standard Power - Sealed Nickel Cadmium Battery - LED Exits
Input Power:
Input Current (Max.):
Power Factor:
347V
T.H.D.:
120V
7.4W
9.3W
8.5W
277V
347V
7.6W
9.6W
8.4W
11.2W
120V
.08A
.09A
.09A
.11A
277V
.04A
.04A
.04A
.05A
120V
>.72
>.84
>.79
>.90
277V
>.72
>.84
>.79
>.90
120V
<34%
<31%
<30%
<26%
277V
<34%
<32%
<31%
<26%
• UL 924 Listed, Life Safety
NFPA 101, CSA certified,
NEC/OSHA, most state
and local codes
Red Letters Single Face
Red Letters Double Face
Green Letters Single Face
Green Letters Double Face
7.5W
9.5W
8.7W
.03A
.03A
.03A
.04A
11.4W 11.7W
Standard Power with Self Diagnostics Option (Fully Discharged Battery) - LED Exits
Red Letters Single Face
Red Letters Double Face
Green Letters Single Face
Green Letters Double Face
8.4W
9.8W
9.1W
8.5W
9.5W
9.0W
8.6W
9.7W
9.2W
.08A
.09A
.09A
.10A
.04A
.04A
.04A
.05A
.03A
.03A
.03A
.03A
>.82
>.86
>.86
>.90
>.82
>.84
>.85
>.88
<31%
<30%
<27%
<25%
<31%
<30%
<27%
<26%
11.2W 10.5W
10.5W
Standby Mode (Fully Charged Battery) Sealed Nickel Cadmium Battery Input Power consumption is reduced by approximately 1.5 Watts
Self Diagnostic Option with Low Power Option (Operating in Low Power Mode) (Fully Discharged Battery) - LED Exits
Red Letters Single Face
Red Letters Double Face
6.5W
7.8W
6.7W
8.1W
.07A
.08A
.03A
.04A
>.75
>.80
>.72
>.80
<37%
<33%
<37%
<33%
Standby Mode (Fully Charged Battery) Sealed Nickel Cadmium Battery Input Power consumption is reduced by approximately 4 Watts
Charge Mode, Fully Discharged Battery): Sealed Lead Calcium Battery Screw-in LED Lamps
Red Letters 16.6W
17.5W
.15A
.07A
>.90
>.91
<28%
<28%
Standby Mode (Fully Charged Battery) Sealed Nickel Cadmium Battery Input Power consumption is reduced by approximately 10 Watts in
the standby operating mode
Sealed Nickel Cadmium Battery: Screw-in LED Lamps
Red Letters 8.4W
8.3W
.08A
.03A
>.92
>.92
<35%
<34%
636 COOPER LIGHTING
®
COOPER LIGHTING - SURE-LITES
DIMENSIONS
8 1/4" (210mm)
DESCRIPTION
5 3/4"
(146mm)
The Sure-Lites Pinnacle Family
of Surface Mounted Die Cast
Aluminum Exits combine
2 5/8" (67mm)
strength, durability and
aesthetics. The pleasing lines
and the range of architecturally
compatible finishes will add a
new dimension to any design.
8 1/4"
(210mm)
2 1/4"
(57mm)
13 5/8" (346mm)
CAX SERIES
Die Cast
Self-Powered
ORDERING INFORMATION-INCANDESCENT, FLUORESCENT EXITS
SAMPLE NUMBER: CAX310085R
Incandescent, Compact
Fluorescent Lamping
CAX
Family
Factory Options
00=No Options
20=DC Flasher (1)
30=DC Flasher/ Buzzer (1)
65=Tamperproof Screws
85=Vandal Shield
90=DC Only Fire Alarm (1)
Interface
Housing Finishes
Blank=Brushed Aluminum
Face with Black Housing
W=White
B=Black
BZ=Bronze
Factory Options
SD=Self-Diagnostic
(Incandescent Only)
EXIT LIGHTING
CAX=Die Cast Aluminum
Exit Surface Mount
Series
Accessories (Order Separately)
Screwdrivers
059012SP=Tamperproof
Screwdriver Bit
VRSD=Vandal Resistant
Screwdriver
3=Self-Powered, Incandescent
5=Self-Powered, Fluorescent
• Dual-voltage input
120/277VAC, 60Hz
Voltage
Blank=120V/277V
Face Options
1=Single
2=Double
• Die cast aluminum housing
with hinged faceplate and
die-cast canopy for ceiling
or end mounting
Wire Guard
Letter Colors
R=Red
G=Green
WG1=Surface, Wire Guard
WGS11=Ceiling, End Wire
Guard
Battery
00=Lead Calcium
70=Nickel Cadmium
(2)
RWO=Red on White
VS1=Polycarbonate Vandal
Shield
GWO=Green on White (2)
WRO=White on Red (2)
WGO=White on Green (2)
O=Open Face (2)
• AC incandescent: two 20W
T6 1/2 intermediate base
lamps
Pendant Kits
CAX18PK=Pendant Kit, white
CAX18PKHT=”Hang-true”
Pendant Kit, white
• AC fluorescent: two 5W
F5TT compact fluorescent
lamps
• Lead Calcium or Premium
Nickel Cadmium battery
Wattage Ratings
Lead Calcium Battery=10.8W for 1 1/2 hrs., 7.2W for 2 hrs.
Nickel Cadmium Battery=15.0W for 1 1/2 hrs.
• Universal pattern
knockouts on rear of single
face housing for direct
mounting to junction box
Energy Data
Charge Mode (Fully Discharged Battery): Sealed Lead Calcium Battery
Input Power:
Input Current (Max.):
Power Factor:
120V 277V
T.H.D.:
120V
• NFPA 101 compliant
knockout chevrons allow
quick conversion to
directional signs
120V
277V
120V
277V
277V
Incandescent Exits-20W Lamps 53W
51W
30W
.45A
.40A
.19A
.16A
>.99 >.98
>.61 >.66
<9%
<12%
<10%
<11%
Fluorescent Exits-5W Lamps
29W
• Stencil and open face
signs available
Standby Mode (Fully Charged Battery) Sealed Lead Calcium Battery Input Power consumption is reduced by approximately 12 Watts in the
standby operating mode
• Downlight diffuser
Sealed Nickel Cadmium Battery
Incandescent Exits-20W Lamps 45W
Fluorescent Exits - 5W Lamps 20W
43W
21W
.38A
.36A
.16A
.15A
>.99 >.99
>.48 >.52
<7%
<15%
<7%
<14%
• Line-latching, Solid-State
voltage limited charger,
Solid-State switching,
low-voltage disconnect,
brownout circuit,
overload/short-circuit
protection, test
switch/power indicator
light
• UL 924 Listed, Life Safety
NFPA 101, CSA Certified,
NEC/OSHA, UL FTBR
Listed, most state and
local codes
(1)DC Flasher, DC Flasher/Buzzer and DC Fire Alarm Interface options available with Incandescent exits only.(2) RWO, GWO, WRO, and WGO
are open face styles with “Exit” legend. Use “O” option for ordering special wording-lenses ordered separately (consult Cooper Lighting
Representative).
COOPER LIGHTING 637
|